There are two objectives of this study.The first one was to study the new instrument Deltack fromPrufbau, and with the new knowledge, study the interaction between blanket and paper.Deltack is a new instrument to measure the ink splitting force. Blankets from an earlier study doneby GATF have been montered on 12 different Deltack print forms and those have together with Deltackbeen the base for this project.This study together with information from GATF?s study shows that some of the blankets have ahigher capability to adsorb ink. Those blankets generate a sharper shape on the force curve, they havea lower dot gain, but they print not as good solid..

In the proposition Nya förmånsrättsregler, 2002/03:49, the government suggests a new bill of beneficial rights, or FRL. The proposition has several changes, mostly for The Banking system. One of the changes is that the banks´ individual beneficial rights shall be replaced by a general beneficial right, where the beneficial value never exceeds 55 percent of the value of insurance bonds. Previously, the beneficial value was 100 percent.The purpose of this essay is to evaluate the relationship between the banks´ activities, and the new bill of beneficial rights, especially what the effects will become for the public companies within the printing houses, with 1 - 49 employees in the Skåne Region.The survey includes a total of 142 companies and it was distributed via e-mail. The conclusions from the study are that there are tendencies of increased difficulties for companies to get their credits granted by the banks.

The aim of this study was to see if an increased amount of gas could be seen in the small bowel of cats subjected to trauma and if measuring the amount of gas could be of any use in the clinical evaluation of the patient. When the peristaltic waves in the small bowel decreases due to neurological damage or chock the microorganisms of the gut grow in number and possibly produce more gas and toxins. When the cat is stressed it can swallow more air then usual, and the air that is in solution with the chyme in the lumen of the gut separates from the ingesta. When the bowel isn?t moving it becomes easier for bacteria and toxins to penetrate the wall of the gut, and then get access to the bloodstream.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

During 2006 an estimated number of 150 persons are supposed to have been killed in road accidents caused by speed limit violations. Through Automatic traffic security control (ATK) the Swedish road administration (Vägverket) is working towards lowering the number of speed related accidents. By placing the speed cameras on roads they've managed to lower the average speed at those places. The enlargement of the number of speed cameras is based upon knowledge about for example how high the risk is for speed related accidents on the roads. The speed cameras always measure the speed in which every vehicle passes, but aren't constantly activated to register speed violations.

Bobergs printing house in Falun has during some time had problems regarding deposits on blankets intheirs Müller Martini UV-printing presses. Deposits appear in both image areas and non-image areas.These areas have been analyzed and the deposits on non-image areas contain chalk, clay and talc. Thequestion remains how these material bond to the blanket surface. The chalk and clay comes from thepaper. The talc comes from the ink.

A great amount of todays drivers? are constantly exceeding the speed limits on the roads. As a consequense of this, a large number of speed redusing devises, for example speed bumps, has been built around the country. As reports in local medias point out, the acceptance for these types of speed reducing devises, differs and there are many thoughts about location, construction and effect on the traffic safety. This paper approaches the complexity of these problems from the drivers? point of view, based on literature studies and a questionnaire. The goal is not to argue for or against speed reducing devises, but to try to find the source of annoyment and how to proceed further. Some of the problems turned out to be easy to fix, for example porly marked speed bumps.

This degree theme work aims to evaluate the present ICC-profile and printing ink of Dalarnas Tidningar AB. The companyhas changed printing ink quality and wants to evaluate how the present ICC-profile work with the new printingink. Four different ICC-profiles were included in the comparison.One test printing was accomplished with two different separations. Two new ICC-profile was created, as a comparingmaterial. An densitometer was used to measure the technical parameters of the printing.

Calesco Foil AB is a manufacturer of thin flexible circuits for heating or electric conduction.The plant is located in Kolbäck, Sweden.One of the company?s products, the conducting polymer pasta is in present situationunpredictable. Unpredictable in the way that the same type of heater shows differentresistance, depending on which time they have been produced. The desired repetitivelyprocess is almost non-existing.The aim of this master thesis is to primary identify those parameters that effects theresistance, observe and if possible to perform tests on them. The results from this analysisstand as base for recommendations to achieve a repetitive and standardized printing process.The results and the observations from the tests indicate that a repetitive process is possible toachieve.

Rett syndrome is a congenital neurological syndrome, which in the classic phenotype only affects girls. The symptoms include lack of speech, stereotypic movements of hands, dyspraxia and mental retardation, and these symptoms lead to communicative impairments. The purpose of this study was to examine whether the intervention method Intensive Imitation affected interaction/communication and initiative in a girl with Rett syndrome. The design of the study was a Single Subject Experimental Design with a three-week long intervention period where the girl participated daily in 30- minute sessions of Intensive Imitation together with the test conductor. Interaction, communication and initiatives were observed and analyzed before (Baseline A), during and after (Baseline B) the intervention period.